Head Gasket Replacement in Warsaw Bielany

Head gasket replacement at the Pulsecar workshop in Warsaw Bielany costs from 1000 zł in labor. A damaged gasket can cause coolant loss, combustion gases entering the cooling system or fluids mixing. Before the repair, the cause of the symptoms must be confirmed, and we present the quote to the customer for approval.

Book a visit Call: +48 571 058 591

ul. Arkuszowa 176, 01-935 Warsaw Bielany · Mon–Fri 09:00–18:00, Sat 09:00–15:00

Symptoms

Signs of a blown head gasket

A failed seal between the block and the head can cause various symptoms, but no single symptom gives a definite diagnosis.

White smoke from the exhaust

Thick, persistent white vapor after the engine has warmed up can indicate coolant getting into the combustion chamber. Brief white vapor on a cold start, however, is often just normal condensation.

Oil in the coolant

Oily sludge or traces of oil in the expansion tank can mean a leak between the systems. The cause may be the head gasket, but also a damaged oil cooler.

Coolant loss with no visible leak

A steady drop in coolant level can indicate an internal leak. However, the hoses, radiator, water pump and other components should also be checked.

Engine overheating

A damaged gasket can disrupt the cooling system. Overheating can also be caused by a faulty thermostat, fan, water pump or low coolant.

Rough running

In some cases the leak affects compression and causes cylinder problems. Similar symptoms can also come from the ignition or fuel system.

How we work

How a head gasket replacement works

The repair requires proper diagnostics and following the removal and fitting procedures specified for the particular engine.

Confirming the cause

We analyze the symptoms and determine which checks are needed. Depending on the situation, a cooling system pressure test, a test for combustion gases in the coolant or a compression test can help.

Preparing for removal

Depending on the engine, intake, exhaust, timing and cooling system components may need to be disconnected. The scope of work varies between designs.

Cylinder head removal

Once the required components are off, the head is removed following the manufacturer's procedure. Keeping the correct sequence and protecting engine parts is essential.

Head and block assessment

After removal, the sealing surfaces and visible signs of damage are checked. Depending on the result, a specialist flatness or pressure check or machining of the head may be needed.

Fitting the new gasket

The gasket, bolts and other parts must match the engine specification. The tightening sequence and torque settings for the head bolts are especially important.

Post-repair check

After reassembly, the cooling system operation, tightness and available engine parameters are checked. The scope of the check depends on the design and the earlier symptoms.

Price

How much does head gasket replacement cost in Warsaw

Labor starts at 1000 zł, while the total cost depends on the engine design and the condition of parts found during dismantling.

Head gasket replacement cost from 1000 zł

This amount is the starting price for labor. The cost depends on access to the head, the timing design and the amount of dismantling needed.

Gasket and fitting parts

The cost of the gasket, head bolts and other required parts depends on the engine. These are priced separately in the quote.

Cylinder head condition

If warping or other damage is found after removal, additional checks or machining may be needed. This work requires separate agreement.

Fluids

The repair may require changing the engine oil and coolant. At Pulsecar, labor for an oil and oil filter change starts at 120 zł, and for a coolant change at 200 zł.

Quote before we start

Before the repair, we give you a quote to approve. Any additional damage found after dismantling requires agreement on the further scope of work.

Tips

What to do if you suspect a blown head gasket

Reacting quickly to overheating and coolant loss can reduce the risk of more serious engine damage.

Don't keep driving an overheated engine

High temperatures can warp the cylinder head and cause further damage. If an overheating warning appears, stop the car safely.

Don't open a hot expansion tank

The cooling system is under pressure. Opening the cap when hot risks hot coolant spraying out and causing burns.

Don't assume a fault from white vapor

Water vapor on a cold start is often normal. What's worrying is vapor that persists after warm-up, especially combined with coolant loss.

Find the cause of coolant loss

Regularly topping up coolant without finding the source of the problem can delay detecting the fault. Check the level with the engine cold, as described in the car's manual.

What we do

Checking symptoms that may point to a blown head gasket.
Check for visible signs of oil and coolant mixing.
Assessment of possible causes of engine overheating and coolant loss.
Removal of the parts needed to access the cylinder head.
Assessment of the mating surfaces after removal.
Head gasket replacement from 1000 zł labor.
Reassembly to the engine's requirements and an operation check after the repair.

Prices

Head gasket replacement	Price	Time
Head gasket replacement	1000 zł	55 min
Engine endoscopic diagnostics	300 zł	55 min
Coolant replacement	200 zł	55 min

Indicative prices from the workshop price list. We give the exact cost after diagnostics — the customer approves the quote before any work starts.

Full price list

From call to pick-up

1.Contact and booking
Call +48 571 058 591 or pick a free slot online. Describe the smoke, coolant loss or overheating.
2.Symptom assessment
We take in your car at ul. Arkuszowa 176 in Warsaw and agree on the diagnostics needed.
3.Quote to approve
We present the planned scope of work and the quote. Any additional work found after dismantling requires further approval.
4.Engine repair
Once approved, we carry out the agreed gasket replacement and cylinder head refitting.
5.Check and pick-up
We check the engine and cooling system after the repair. Labor comes with a 6-month warranty.

Head gasket replacement — illustrative photo — Illustrative photo

Getting here

Car workshop in Warsaw Bielany

Pulsecar is at ul. Arkuszowa 176, 01-935 Warsaw. It is an easy drive from all of Bielany — Chomiczówka, Wawrzyszew, Wrzeciono, Piaski, Młociny and Huta — as well as from Żoliborz, Bemowo, Łomianki and Stare Babice.

Mon–Fri 09:00–18:00, Sat 09:00–15:00

We speak Polish, English, Ukrainian, Russian and Belarusian.

Get directions

Frequently asked questions

How much does head gasket replacement cost?

At Pulsecar, labor costs from 1000 zł. Parts and any additional work are priced separately.

What are the signs of a blown head gasket?

Possible symptoms include coolant loss, overheating, persistent white vapor from the exhaust and fluids mixing. Confirmation requires diagnostics.

Does white smoke from the exhaust mean a blown head gasket?

Not always. With a cold engine it's often water vapor. What's worrying is persistent heavy vapor combined with coolant loss.

What does oil in the coolant mean?

It can indicate a leak between the systems, but it isn't always caused by the head gasket. A damaged oil cooler is another possible cause.

Does the cylinder head need skimming when replacing the gasket?

Not in every case. The decision depends on measurements, surface condition and the engine manufacturer's requirements.

Where can I get a head gasket replaced in Bielany?

Pulsecar is at ul. Arkuszowa 176 in Warsaw and services all makes. Online booking lets you choose a free slot. Phone: +48 571 058 591. Hours: Mon–Fri 9:00–18:00, Sat 9:00–15:00.

Other services

All services